Car Amplifier Hooked Up To Computer PSU To Power Car Subwoofers In Your House!

And a big part of that information is our music collection. It most probably occupies the biggest part of the SD card on our smartphone, and we would like to listen to it anywhere and anytime. And a part of our day where we would want to listen to our music is when we drive in our cars, going from place to place, but also in our home, when we like to plug in our smartphones to the audio system and start relaxing. There are a few options that work with your existing audio system, the old fashioned one, with just a few modifications. Of course, newer models of car stereos or home audio systems already have Wi-Fi or Bluetooth connectivity and can be connected to many devices such as smartphones and tablets. Depending on which device you want to connect your smartphone, there are a few options available. Newer models, sometimes called smart radios now have this feature integrated. From here, the process is very simple. Just turn on the Bluetooth in the car radio and search for it from your device.

Car Audio System Wiring Basics

Curtis answered 4 years ago Look for a capacitor for car audio systems. I would look into upgrading your alternator also. Report Ilregal answered 4 years ago You need to hook those batteries correctly or you will end up with 24 volt on a 12 volt system and that’s not good for 12 volt wiring and you will be sorry. The following is how you will need to do it, If you are going to buy new 12 Volt or 6 Volt batteries for your car as your probably trying to power a monster stereo and this is how you’d want to do it for a RV also, it is important to know how to wire them properly so that you do not damage your cars electrical system.

Although this is an easy concept to understand, many people tend to get this wrong. Basically, there are two ways to wire your batteries:

How to hook up speakers for proper impedance. Speaker Connections for proper impedance match. A note about amplifiers: You should always use the recommended load for your amplifier. However, if you must use a load other than the recommended load, here is a short guide.

Courtesy of Family Handyman The Only Tool Set You Need You probably don’t have a complete set of sockets and wrenches in your tool bag or the emergency vehicle kit under your truck seat. The pass-through sockets fit over protruding bolt threads and nuts mounted on studs, eliminating the need to carry deep sockets. For more grabbing power, simply replace the smooth jaw with the serrated side, and you’ve got yourself a pipe wrench, perfect for stripped bolt heads and pipes up to 1 in. You can purchase the kit at The Home Depot and other retailers.

Learn some tricks to loosen nuts, bolts and screws that are tricky. Courtesy of Family Handyman Temporary wallpaper Creating an accent wall with a stylish wallpaper is a great way to update a room, but it’s amazing how fast ‘trendy’ can become just plain weird. And if you’ve ever had to remove stubbornly stuck wallpaper, you won’t want to repeat the experience. Enter Tempaper, a removable wallpaper that sticks to any smooth, painted or primed surface.

When you’re tired of the pattern or you’re trying to sell your house without frightening prospective buyers, simply peel it off. It won’t damage the drywall or leave messy glue behind.

How to Connect 2 Speakers to 1 Amplifier

Ask Question Step 3: I decided to not cut up my PSU cables as i may need the computer it came from at some point, you will need to find the pins shown in the pic, they are on the connector that was originally on your motherboard, the cables should be green and black, any black ground connector will do the trick. Now a quick check, turn on your PSU and if the fan spins you’re all set for the next step.

Add Tip Step 4: Wiring Your Amp So you have your amp ready? This is a good reference, it was made by BR14n https:

How to Convert a Home Subwoofer into a Car Audio Subwoofer How to Convert a Home Subwoofer into a Car Audio Subwoofer. What You’ll Need. A home subwoofer Your home subwoofer will now work like a charm in your car. Hook the amplifier up to the subwoofer channel on your car’s stereo head unit and enjoy the bass.

I was pestering the guy at Pacific Stereo in the mall, begging to audition the Sansui AU amplifier and a pair of JBL L speakers that I was lusting after—and yes, the speakers had the orange grilles. Time to put up or shut up. Visitors to the TONE studio always take note of them off in the corner, and they always bring back fond memories.

When a cursory 4: In , a pound amplifier felt like a monster, but next to my reference Pass Xs monoblocks with a combined weight of almost a ton, literally , the AU is comparatively gentle on my back. Crazy as this seems, the purity of the dCS as a source truly reveals just how good the Sansui really is. Extended listening to this combo proves musically involving, and revisiting the music I was listening to in is particularly fun.

The combination just works, and while the vintage combo is a bit grungier and foggier than my reference system, the whole experience is welcome and highly palatable. Seriously, if I quit my job as a hi-fi reviewer tomorrow, I could easily live with this system. Of course, the AU has a pair of tone controls for bass and treble that can be switched out of the signal path for purists. The watt-per-channel Sansui amplifier is rated conservatively, and reviews from Stereo Review and Audio from when the AU was new indicate that it produced around watts into an 8-ohm load; more than enough to drive all but Magnepans to a major level.

Connected to a more modern speaker, like the Dali Rubicon 2s featured on page xx of this issue , the AU turns in a superb performance.

Hook Up A Car Stereo In Your House Without PSU (Easiest Way)

Cars use thicker cable due to the high amount of current being drawn from the battery lower voltage appliances tend to draw more current then higher voltage ones, it also helps reduce voltdrop. Someone has said that CCA is what you want to look for on a car battery this is incorrect as Cold Cranking Amps are for when the car is cold and you try to start the engine its designed for a very short duration while keeping a voltage of 12V, the actual battery usage you need to look at is measure in Ah these are usually much smaller then the CCA and are the rating you can safety continuously draw from a car battery.

Note for the writer its a great article but i wouldn’t recommend soldering then crimping, solder is very soft and will become loose after a while your better off crimping stright on the copper. I have recently hooked up my Amplifier to a PCU. But I only used one black and one yellow wire of the PCU to power it.

Aug 27,  · Best Answer: check ALL of the conections. power, ground, lead on, audio. also check if you have the right fuse. the lead on is a small wire that runs from the cd player to the amp when the cd player is turned on, telling the amp to power up as : Resolved.

They have two separate speakers that emit different ranges of sounds. The woofer, or the larger speaker, emits the lower to mid range frequencies. The tweeter, the small speaker, covers the high range frequencies and noises. Separating the tweeter and woofer allows clearer sound with less distortion. Finding, researching and purchasing car speakers that fit the needs of your vehicle is difficult. Sound preference, quality, style, features and price all vary. Our knowledge and first-hand experience with products combined with extensive research has led us to our own list of top 6.

We’ve also assembled a top rated value speakers, check out our Best Value 6. Or, if you’re looking for the ultimate car speakers, take a look through our Best High End 6. And before you choose a speaker for your system, consider learning about Component Car Speakers. Understand their features so that you can make an informed decision when you make your purchase. There are many criteria that we take into consideration when rating and reviewing speakers, including:


Drill Hole onto your surface. For this example its a DELL computer. Make sure the opening is large enough, but not too large, so tha the LED fits inside the hole snuggly. If needed apply some super glue to the LED sides and insert into hole, otherwise if its snug enough, don’t worry about it. Put everything back to gether and see the great results! Its way more bright at night!

87 Responses to Rebuild and Modernize an Old Stereo Console – DIY. Pingback: Rebuilding an Old Stereo Console – DIY – Part 3 along with a watt plate amplifier. I built the box to the recommended specs for the sub and attached the plate amp directly to the box. Everything still works in it and we can even hook up our iphone to.

This project took me a couple of weeks of evenings after work and weekends. It moved into our Craftsman in Atlanta when we did back in and has filled the same role. As a kid, I thought this thing was all wood construction. By breaking it apart, I found that the panels are MDF-like, the doors are hollow plastic, and the wood grain is laminate. Since the speakers have never really worked reliably and the record player was broken, we pretty much stopped listening to the stereo and it was just taking up space.

After a few months, we decided to sell the console in a yard sale. The papers on the left are the original wiring diagrams that were stapled to the inside of the console. I like that kind of stuff. All of the electronics were very nicely integrated into these consoles. During the yard sale, while trying to convince people to buy the stereo, we convinced ourselves to restore the console ourselves.

Car Amplifier and Subwoofer Powered by a Computer Power Supply

In some ways, thick, high-end wire can present MORE of a problem than the conventional skinnier stuff. More on that later. For the purposes of discussion we will use the term “amp” short for amplifier to refer to any receiver, integrated amp or power amp.

Jan 10,  · 1. is the only way to get a true left and right sound from the speakers is to hook them up to a 2 channel amplifier? im pretty sure you cant bridge the two speakers to one monoblock or bridge them to 2 channels each on a 4 channel amp, because it would be giving the speakers the same output, not left and right.

How to hook up a subwoofer to a stereo system Hint: You don’t necessarily need a receiver with subwoofer output jacks. Subs can provide a foundation to the sound that few speakers can muster on their own. So adding a sub is not just about adding more and deeper bass; rather, a properly integrated subwoofer can improve the overall sound of the system. AV receivers feature bass management to direct the low bass frequencies to the sub and the midrange and treble frequencies to the speakers.

The subwoofer is hooked up to the receiver with a single interconnect cable. Stereo receivers, pre-amps, and integrated amplifiers rarely have subwoofer output jacks or offer bass-management options. So instead of using those connections, we’ll use the subwoofer’s speaker-level, aka “high-level,” inputs. Most, but not all, subwoofers have these inputs; they get connected using speaker cables to the same speaker output jacks on your receiver or amplifier that are also hooked up to your speakers.

That means you have to double up the connections on the receiver or amplifier see photo below that illustrates that connection method. The top picture has just the speaker cables connected to the stereo amp; the bottom picture has the speaker and subwoofer cables connected. The sub will use its built-in crossover aka “low pass” filter to determine the upper limit of the frequencies produced by the subwoofer. With small speakers with 4-inch or smaller woofers, you’ll set the sub’s crossover frequency at Hz or higher, and with speakers with 5-inch or larger woofers, 80Hz or lower.

Hooking up my car amplifier in my house (for my MAME arcade)

Hook Up Car Amp in House September 18, No Comments Mrlonelyman, mrunlucky, hook up car amp in house still looking etc paint a sad desperate picture. How to hook up a car subwoofer to your computer or home. Hook up a car amp in your house Auditlaw. Car Subwoofers to Home stereo subwoofers?

Add extreme bass to your car’s system with the Kicker 10" Subwoofer, PT With an amplified loaded enclosure and grille for extra protection, the subwoofer is simple to set up and remove. It is also extremely durable to ensure that is stands the test of time/5(14).

Look up Ohms law All the best Brett I think he is trying to hook the amp up to household electronics and using PC PSU’s to convert the house power to 12V DC geekapproved Wouldn’t it make more sense to run the car amp off the cars 12v battery? Does anyone here have any experience with this sort of thing? It’s a W max amp and he’s planning to connect a pair of W each subs and some crappy speakers probably 25W or so. How many watts would be enough to power this setup?

I checked out a couple of videos and forum posts, but I couldn’t find any information for this particular setup.

Wiring a Car Audio Amplifier and Headunit Up Indoors Using PC Power Supply

Molex Connector Cut the molex Cable so that you have a black and yellow wire sticking out, for those who don’t know. Yellow wire is the 12v cable and the black one is ground. It is ideal you have something similar to what the picture below shows. Cutting Extension Cable Cut both ends of the Extension Cable so that you have three cables sticking out on both ends. You will only be using two of the three cables. In my situation I had a Black, White, Green cable.

Nov 12,  · How to Set Up/Install/Power a Car Subwoofer/Car Amplifier or Car Speakers in your home using a Computer PC Power Supply. NOTE: Doing this set up will obviously be at your own risk, I .

If your car’s stereo system needs more bass, you should consider adding a car audio subwoofer. You could go out and buy a new subwoofer to install in your car, but that requires that you spend a couple of hundred dollars on a quality unit. However, if you have an extra home subwoofer , you can convert it so that it can be used in your car. There are some modifications that will need to be made as there are some very basic differences between the designs of car and home subwoofers.

Still, this step by step guide will show you what you need to do. Step 1 – Choose an Amplifier In most cases, your home-use subwoofer is an active subwoofer. This means that it probably has a built-in amplifier used to power the speaker.

Please turn JavaScript on and reload the page.

Rating Newest Oldest Best Answer: The amplifier and power supply will generate heat when operating, so be sure that there is enough room around the components to let air circulate. Step 2Measure the length of power and ground cable you’ll need. Your power and ground cables will need to reach easily from the terminals of the power supply to the terminals of the amplifier. Take into account how you’ll need to route the cables when measuring.

Step 3Cut your power cable, ground cable and remote turn-on wire to the correct length.

A class D stereo amplifier made with TI’s TPA IC. I made this Class D amplifier to hook it up with an old car of ours. It"s a stereo amp, but I have stacked up two of them for the car.

Power Amplifiers Helping Car Thieves Thieves operate in pairs and take the faint whisper from the key fob in your house, work or on your person, and then amplify or relay it to make it heard by your car as if your fob it was in their hands! Here’s how it works: Your car thinks your fob is next to the car and the doors open instantly.

It’s that easy for them, unless your fob is protected. There has been a steady increase in the number of thefts of vehicles and their contents in recent years as the technology to manipulate keyless entry devices has become cheaper and easier to obtain. Then we wrap the faraday cage in a further layer of tough denier sports nylon to protect it from daily wear and tear.

Our uncompromising design ensures your device is completely enveloped inside a true “faraday cage” with unparalleled shielding performance. Let’s keep it simple – as one customer succinctly puts it, “It works! Customer testimonials prove that our design and materials outperform the competition. These pouches are built to last and can be reused over and over again with minimal shielding degradation. Let those close to you know that you care about them and are looking out for their safety.

The best way to hook up car amp and subs in house

Hi! Do you want find a sex partner? It is easy! Click here, registration is free!